Re: New NSX deployment Sizing and design
In addition to all the above and regarding the following "Is that correct? If it is, can I also run any VMs in the Management / Edge cluster? We host clients and would run all of them in the compute...
View ArticleRe: VXLAN in NSX
Hello, NSX is a networking and security solution, for Networking solutions like logical switching, logical routing, logical LB, logical NAT, logical VPN, ....etc sure you have to use VXLAN.But for...
View ArticleClik here to view.
Re: ESXi Standard switch blocks the network if all Nic's is marked as active...
Update... Now I've move all old machines and Shutdown the SBS DC and it is still the same.I have found out it is the last port NIC B on VM NIC 3 there is causing the problem on this PCIe adapter Intel...
View ArticleRe: Logical Switch
Hello, if you're planning to move your workloads from VLAN to NSX logical switch (LS) so sure you will use LS. LS is a virtual subnet under NSX, this subnet will not be created on your legacy network....
View ArticleRe: vRO 8.1 scriptable task with PowerShell error: Function was stopped. Most...
Thanks for providing the solution. It is working now. I tested two things. Listing all modules with an action: function Handler() { Write-Host "List available modules" Get-Module -ListAvailable |...
View ArticleRe: Airwatch on AOSP devices
Hi ralbertodacu, Thanks for your detailed reply. I can enroll the devices with Legacy mode. Really thanks for your help!
View ArticleRe: No alcanzo ping a mi Vm
Hi, Your question is not very precise, can you explain better what you can't do? it seems that you do not know the network parameters of your Esxi and ask you why you cannot ping the VM.Can you ping...
View ArticleRe: No logro tener Ping desde afuera hacia mi VM
Hi, Network addresses (IPs, subnets and gateways) in a virtual machine are entered in the same way as a physical machine. Precisely from the IPv4 network configuration of the operating system.what...
View ArticleRe: invoke change IP Debian
good Morning, I testet a bit and found that the ifconfig command is ok, but the configuration will not be safed after reboot. so this will not work the correct Location is this, and here it needs to...
View ArticleRe: How to select multi-VMs in vCenter and delete them?
Hi, You have to select the cluster and in the central part of the screen all your vms appear. From there it allows you to select as many as you prefer. ARomeo
View ArticleVCentre is not Working After system Restart
503 Service Unavailable (Failed to connect to endpoint: [class Vmacore::Http::NamedPipeServiceSpec:0x000000e962788e10] _serverNamespace = / action = Allow _pipeName...
View ArticleRe: ESXi hosts CPU over commitment resoultions
And you're certain that your end-user issues are caused by your 5:1 average virtual-to-physical CPU ratio? Before taking any further action, you should monitor and investigate CPU usage and performance...
View ArticleRe: restoreConfiguration A general system error occurred: Internal error
The first post in this 2017 thread mentioned that the user had tried the force switch.
View ArticleRe: ESXI vSphere Hypervisor 7.0 add sas/raid controller drivers to standard...
There are many supported controllers, you can search and filter here: VMware Compatibility Guide - I/O Device Search
View ArticleRe: How to find VM's unutilized or over provisioned resource?
Companies such as Veeam, Turbonomic, SolarWinds all have "comparable" products.
View ArticleClik here to view.
schermata viola esxi 6.5 1U server proliant ML350 Gen9
Buongiorno, possiedo un server proliant ML350 Gen9, l'errore in questione è la schermata viola "pf exception 14 in world 69626", l'errore non si presenta sempre ma prima di effettuare un upgrade,...
View Articlee1000 can't up when i down it in win7 with esxi6.7
as topic,first time open win7 with e1000 could be ok,PING ok.then ,i down the network in win7 and try to up network later,it's failed anyone meet this problem?
View ArticleClik here to view.
Re: VMWare Workstation Won't Start on Linux
Is there no way to get it to work?Try to find anyone, who writes a patch for the module sources to make them supported by your running kernel.
View ArticleRe: Manage Google Chrome with UEM - alternative way
Hi DEMdev and Shreyskar, Thank you for the information, that is very helpful. Another question...currently I have a Chrome Config file (my original chrome config file) and a Chrome - Roaming config...
View ArticleRe: retrieving logs on log browser
Hope you follow this URL for enable log browser.Make sure have administrative privileges on VCSA also check the service "VMware Service Lifecycle Manager API service" is running.If all above is fine...
View Article